To Next Page
W
William JacksonJul 30, 2025
What to do if my Yamaha Recording Equipment has no sound?
- TTonya FarmerJul 30, 2025
If your Yamaha Recording Equipment isn't producing sound, ensure the panel volume and other volume-related parameters are appropriately set. Check that Mute or Solo aren't active. Verify the Variation effect settings, especially if Variation Connection is set to INS, Variation Send is on, and NO EFFECT is selected for Variation Type. In this case, turn off Variation Send for the Part. Also, confirm that the EG Attack Time, Velocity Sensitivity Offset, Note Limit Low and High, and Velocity Limit Low and High settings are correct. If the Note Limit Low is higher than Note Limit High, or if Velocity Limit settings are inappropriate, no sound may be output.
General
