Yamaha MX-50 - Technical Specifications; Output Power and Distortion; Signal-to-Noise Ratio and Separation; Frequency Response and Damping Factor

SPECIFICA
Minimum RMS Output Power Per Channel
20Hz ~ 20kHz 0.003% THD, 8 ohms 125W
0.007% THD, 6 ohms 150W
Dynamic Power Per Channel
(by IHF Dynamic Headroom measuring method) |
8 ohms | 175W
6 ohms | | 220W
4 ohms | 290W
2 ohms = 390W
1 ohm | 420W
DIN Standard Output Power Per Channel
1kHz, 1% THD, 4 ohms 215W
Power Band Width
0.03% THD 62.5W, 8 ohms 10Hz ~ 60kHz
Damping Factor
1kHz, 8 ohms 70
Input Sensitivity/ Impedance
MAIN IN 1.14V/60kO
Frequency Response (20Hz ~ 20kHz) +0, —0.2dB
Total Harmonic Distortions (20Hz ~ 20kHz)
MAIN IN to Sp Out, 62.5W/80 0.003%
intermodulation Distortion
Rated Output/8 ohms 0.003%
Signal to Noise Ratio (IHF-A-Network) |
MAIN IN (shorted) 123dB
MAIN IN (5.1kQ terminated) = 119dB
Residual Noise (IHF-A-Network) 16uV
Channel Separation (Vo1-30dB)
Input shorted, terminated, |
89dB/70dB
1kHz/10kHz
Power Supply
Europe AC220V, 50Hz
U.K. AC240V, 50Hz
Power Consumption 650W
435 x 165 x 420mm
(17-1/8” x 6-1/2” x 16-47/64”)
Dimentions (W x H x D)
Weight . | 13kg
Specifications subject to change without notice.