Do you have a question about the Yamaha MX12/4 and is the answer not in the manual?
Channels | 12 |
---|---|
Mic Inputs | 4 |
Line Inputs | 8 |
EQ | 3-band |
Phantom Power | Yes |
Aux Sends | 2 |
Type | Analog |
Inputs | 12 |
Outputs - Main | 2 |
Buses | 2 |
Inputs - Other | 2 x Stereo Return (1/4" TRS) |
Covers avoiding heat, humidity, dust, vibration, shocks, unauthorized repairs, and proper cable handling/cleaning.
Details FCC compliance requirements, modification warnings, and interference measures for US users.
Provides essential information on connecting the plug and cord, emphasizing earthing requirements for UK users.
Details controls for input channels 1-8 (monaural) and 9-12 (stereo), including GAIN, PEAK indicator, EQ, MONI, EFFECT, Group select, PAN/BAL, and faders.
Explains how to select output signals, control master and group levels, and connect recording devices.
Details the graphic equalizer for tonal adjustment and the built-in digital effects selection and activation.
Explains power status indicators and controls for return signals, sends, and headphone/monitor outputs.
Details XLR mic inputs, TRS line inputs, and INS I/O jacks for channels 1-4.
Describes RTN, SEND, ST OUTPUT, GROUP OUTPUT, C-R OUT, and PHONES connectors.
Provides a table detailing the pinout and polarity for various connector types.
Explains the main power switch and the phantom power switch for condenser microphones.
Lists overall specifications including frequency response, distortion, hum/noise, gain, crosstalk, EQ, and effects.
Details input connectors, gain trim, impedance, sensitivity, input level, and connector types.
Details output connectors, impedance, output level, and connector types.