Need help?Do you have a question about the Yamaha MG16X and is the answer not in the manual?
General| Channels quantity | 16 channels |
|---|---|
| Channel fader (1kHz) | -102 dB |
| Digital sound processing | - bit |
| Total Harmonic Distortion (THD) | 0.03 % |
| Built-in display | Yes |
| XLR out | 2 |
| Monitor out | 1 |
| AUX out ports | 4 |
| Headphone connectivity | 6.3 mm |
| Product color | Gray |
| Phantom power | +48 V |
| Power consumption (typical) | 30 W |
Weight and Dimensions| Depth | 500 mm |
|---|---|
| Width | 444 mm |
| Height | 130 mm |
| Weight | 6800 g |
Ensures proper grounding, plug safety, and professional servicing for electrical hazards.
Addresses usage near water, power cord protection, and unplugging during storms or long periods.
Covers safe usage of power cords, grounding, and electrical precautions to prevent hazards.
Guidelines for handling the device safely, protecting it from water, fire, and environmental damage.
Details on proper handling, maintenance, cleaning, and operational guidelines to ensure safe use.
Highlights high-quality Class-A microphone preamplifiers and operational amplifiers for superior audio performance.
Describes the 24 high-quality digital effects based on SPX algorithms for sonic enhancement.
Details the 24-bit/192 kHz USB 2.0 interface for computer audio playback and recording.
Steps for powering on the mixer and connected audio devices in the correct sequence.
Steps to adjust channel levels and signal routing to achieve audible output through speakers or headphones.
Instructions on selecting and adjusting built-in effects like reverb and delay for enhanced audio mixes.
Covers PAD, HPF, GAIN, COMP, PHANTOM +48V, and LINE/USB controls for signal adjustment and routing.
Details on adjusting EQ bands (HIGH, MID, LOW) and controlling AUX send levels for individual channels.
Covers PAN/BAL, ON switches, PEAK indicators, bus assignment, PFL, and channel fader operations.
Details on using the PROGRAM knob to select and enable built-in effects, including computer audio control.
Covers PARAMETER knob, AUX/FX sends, FX ON switch, bus assignment, PFL, and FX RTN LEVEL adjustments.
Information on STEREO OUT jacks for main speakers and PHONES jack for headphones.
Checks instrument, microphone, speaker connections, cable integrity, and signal path for sound issues.
Guidance on setting gain, switches, faders, and using monitor controls for overall sound balance and troubleshooting.
Addresses issues like no power, no sound from outputs, or low/distorted/noisy audio.
To Next Page
