Need help?Do you have a question about the Yamaha P1000S and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 20 kOhms (balanced), 10 kOhms (unbalanced) |
| Signal-to-Noise Ratio | 100 dB |
| Damping Factor | 200 |
| Power Output (8 ohms) | 350W |
| Total Harmonic Distortion (THD) | 0.1% |
| Dimensions | 480 x 88 x 456 mm |
| Power Output (4 ohms) | 500W x 2 |
Explains safety pictograms used in the manual.
Details risks of death or severe injury from incorrect handling.
Covers precautions related to power, water, and placement.
Covers precautions related to power cords and grounding.
Covers actions for damaged cords or unusual signs.
Covers placement, ventilation, and avoiding certain installation conditions.
Covers speaker cable usage, connecting equipment, and volume settings.
Covers connector polarity and mobile phone interference.
Lists key features like input/output terminals, modes, and cooling.
Details components like power switch, indicators, and volume control.
Explains how to attach the security cover to protect the volume knob.
Describes the indicator for the YS Processing feature.
Explains air intake vents and fan operation for cooling.
Explains filter type selection and cutoff frequency adjustment.
Explains the YS Processing switch and its effect on low frequencies.
Details XLR and phone input terminal pin assignments.
Explains the different operating modes (STEREO/PARALLEL/BRIDGE).
Lists speaker output terminal types for different models.
Explains the purpose of the ground terminal for noise reduction.
Explains the high-pass filter switch for cutting low frequencies.
Explains minimum impedance for different connection methods.
Shows wiring diagrams for 5-way binding post and Speakon terminals.
Shows wiring diagrams for 5-way binding post and Speakon terminals.
Shows wiring diagram for phone terminals.
Details connecting speaker cables to 5-way terminals.
Details connecting speaker cables to Speakon terminals.
Details connecting speaker cables to phone terminals.
Explains mounting multiple amplifiers in a rack using ventilation panels.
Specifies using 1U blank panels for ventilation.
Lists detailed technical specs: output, frequency, SN ratio, etc.
Provides the internal circuit diagram for P7000S/P5000S models.
Provides the internal circuit diagram for P3500S/P2500S models.
Shows the physical size and measurements of the unit.
Displays power consumption vs. output power for P7000S.
Displays power consumption vs. output power for P5000S.
Displays power consumption vs. output power for P3500S.
Displays power consumption vs. output power for P2500S.
Displays power consumption vs. output power for P1000S.
Explains indicator status, cause, action, and protection state.
Details specific indicator issues and resolutions for these models.
Details specific indicator issues and resolutions for these models.
Information regarding the warranty period and procedures.
Disclaimer regarding product-induced damages and compensation limits.
Guidance on troubleshooting, contacting service, and repair procedures.
Contact information for inquiries and support.
List of sales offices for purchasing or business inquiries.
List of service centers for repairs and support.
To Next Page
