8-17
Transmission oil
Transmission oil measurement
1. Place the vehicle on a level surface.
2. Remove the transmission oil filler plug
and check the oil level. It should be up to
the brim of the filler hole. If the level is
low, add sufficient oil of the recommend-
ed type to raise it to the specified level.
1. Transmission oil plug
CAUTION:
Be sure no foreign material enters the
transmission case.
3. Install the transmission oil filler plug.
Recommended oil:
SAE 90 gear oil
Oil quantity:
0.42 L (0.37 Imp qt, 0.44 US qt)
1
UJW410.book Page 17 Monday, December 15, 2003 4:36 PM
To Next Page
Loading...
Need help?
General
