PSR-E360 Owner’s Manual
14
Setting Up
Display Items
These indicate the oper-
ating condition of the
instrument.
Song/Voice/Style
Normally this indicates
the notes you play. When
the Song Lesson function
is used, this indicates the
current notes and chord
of playback.
Notation
• Any notes occurring
below or above the staff
are indicated by “8va.”
• For a few specific
chords, not all notes
may be shown, due to
space limitations in the
display.
NOTE
Each indication is shown when the corresponding function is turned
on.
... Ultra-Wide Stereo (page 16)
... Touch Response (page 16)
... Auto Accompaniment (page 25)
... Indicates that a Dual Voice (No.386–400) is selected.
... Duo (page 17)
On/Off status
Indicates the chord which is played
on the Auto Accompaniment range
(page 25) of the keyboard, or speci-
fied via Song playback.
Normally indicates the
current measure num-
ber of current Style or
Song. When the
[FUNCTION] button
(page 32) is in use,
this indicates the Func-
tion number.
Chord
Measure or Function
003
Indicates the on/off status of Song
playback or target Track of Song
recording (page 21).
Lit: Track contains data
Unlit: Track is muted or con-
tains no data
Indicates the current beat of playback.
Song Track status
Beat
Indicates notes currently being played. Indicates
the melody and chord notes of a Song when the
Song lesson function is in use. Also indicates the
notes of a chord when using the Auto Accompani-
ment function (page 25).
Keyboard Display
Basic Operations
Before operating the instrument, it may be
helpful to familiarize yourself with the basic
controls below that are used to select items
and change values.
Number buttons
Use the number buttons to directly enter an
item or value. For numbers that start with
one or two zeroes, the first zeroes can be
omitted.
[+] and [-] buttons
Press the [+] button briefly to increase the
value by 1, or press the [-] button briefly to
decrease the value by 1. Press and hold
either button to continuously increase or
decrease the value in the corresponding
direction.
Example: Selecting Voice 003, Bright Piano.
Press number buttons [0],
[0], [3], or simply press [3].
Press briefly to
increase.
Press briefly to
decrease.
Display Items and Basic Operations
To Next Page
Loading...
Need help?
General
