Yamaha PSR-E443 - Layering a Dual Voice; Playing a Split Voice in the Left Hand Area; Voices

Try Playing a Variety of Instrument Voices
PSR-E443 Owner’s Manual
18
Quick Guide
In addition to the Main Voice, you can layer a differ-
ent Voice over the entire keyboard as a “Dual Voice.”
1
Press the [DUAL] button to turn Dual on.
2
Press the [DUAL] button again to exit
from Dual.
Although turning on Dual will select a Dual Voice
suitable for the current Main Voice, you can easily
select a different Dual Voice (page 40).
By dividing the keyboard into the two separate areas,
you can play a different Voice between the Left hand
and Right hand areas.
1
Press the [SPLIT] button to turn on Split.
The keyboard is divided into the Left hand and
Right hand areas.
You can play a “Split Voice” on the Left hand area
of the keyboard while playing a Main Voice and
Dual Voice on the Right hand area of the key-
board.
The highest key for the Left hand area is referred
to as the “Split Point” which can be changed from
the default F#2 key. For details, refer to page 47.
2
Press the [SPLIT] button again to exit
from Split.
You can easily select a different Split Voice (page 40).
Layering a Dual Voice
Flute
134
Two voices will
sound at the
same time.
Appears when
dual voice is on
Playing a Split Voice in the Left
Hand area
Flute
134
Appears when split
voice is on
Split voice
Main voice and dual voice
Split Point ... default value: 054 (F#2)
036
(C1)
048
(C2)
060
(C3)
072
(C4)
084
(C5)
096
(C6)