To Next PageTo Next PageHow to adjust keyboard volume relative to Song/Style playback on Yamaha PSR-S950 Musical Instrument?
If the keyboard volume is lower than the Song/Style playback volume on your Yamaha Musical Instrument, raise the volume in the BALANCE display.
What to do if an existing file is not shown on Yamaha PSR-S950?
If an existing file is not shown on your Yamaha Musical Instrument: * The file extension (.MID, etc.) may have been changed or deleted. Manually rename the file, adding the appropriate extension, on a computer. * Data files with names of more than 50 characters cannot be handled by the instrument. Rename the file, reducing the number of characters to 50 or less.
Why don't all notes sound when played simultaneously on my Yamaha PSR-S950 Musical Instrument?
If not all simultaneously played notes sound on your Yamaha Musical Instrument, it's likely that you are exceeding the maximum polyphony of the instrument.
Why won't the main display appear on my Yamaha Musical Instrument?
If the Main display on your Yamaha Musical Instrument doesn't appear when you turn on the power, it might be due to a USB flash memory device being installed. To resolve this, turn off the power, disconnect the USB device, and then turn the power back on.
What to do if I hear noise from my Yamaha Musical Instrument speakers?
If you're hearing noise from the speakers of your Yamaha Musical Instrument, try turning off any nearby mobile phones or moving them further away from the instrument. This should help reduce interference.
Why does my Yamaha PSR-S950 sound distorted or noisy?
If the sound from your Yamaha Musical Instrument is distorted or noisy: * Ensure that all relevant volume settings are at appropriate levels. The volume may be turned up too high. * Also, review the effect or filter settings, and adjust them as needed.
How to fix low or no sound on my Yamaha Musical Instrument?
If the overall volume of your Yamaha Musical Instrument is too low or you're not hearing any sound, there are several things to check: * Ensure the master volume isn't set too low by adjusting it with the [MASTER VOLUME] dial. * Make sure the PART ON/OFF [RIGHT 1]/ [RIGHT 2]/[LEFT] button is activated. * Increase the volume in the BALANCE display. * Verify the desired channel is set to ON. * Unplug any connected headphones. * Deactivate the [FADE IN/OUT] function by pressing the button.
General| Polyphony | 128 |
|---|---|
| Styles | 408 |
| One Touch Setting (OTS) | 4 for each Style |
| Amplifiers | 15 W x 2 |
| Featured Voices | Super Articulation Voices, Mega Voices |
| Featured Styles | MegaVoices, Session Styles |
| Recording Format | WAV |
| Internal Memory | 6.7 MB |
| Effects | Reverb, Chorus, DSP, Master EQ |
| Speakers | 13 cm + 5 cm (dome) x 2 |
| Connectivity | USB TO DEVICE, USB TO HOST, MIDI In/Out |
| Power Supply | AC Adaptor (PA-300C) |
| Weight | 11.5 kg |
| Keyboard Type | 61 keys, touch-sensitive |
| Dimensions | 1002 x 148 x 437 mm |
Essential safety warnings to prevent serious injury or death from hazards.
Precautions to avoid physical injury or damage to the instrument or property.
Introduction to demonstration features for hands-on experience.
Overview of the instrument's diverse range of realistic instrument voices.
Introduction to using the auto-accompaniment (Style) function.
Introduction to playing along with MIDI songs.
Details and descriptions of the instrument's top panel controls and buttons.
Description of the various connection jacks located on the rear panel.
Information regarding the importance of air vents for instrument ventilation.
Instructions for attaching the music rest to the instrument.
Guidance on connecting and using headphones with the instrument.
Step-by-step instructions for powering on the instrument and starting to play.
Method to disable the automatic power off feature.
Instructions on how to adjust the contrast of the instrument's display.
Process to change the language used in the instrument's display messages.
Procedure to check the instrument's current software version number.
Instructions for accessing and using the instrument's built-in demonstration functions.
Explanation of the LCD display and the controls used to navigate it.
How TAB buttons are used to switch between different display pages.
How numbered buttons select options or adjust parameter values.
Using the DATA ENTRY dial for file selection and parameter adjustment.
Function of the EXIT button to return to previous displays.
Using Direct Access for quick calls to specific displays.
Displays for song/style names, tempo, and related information.
Shows current position in playback (bar, beat, tempo).
Displays the detected chord name when accompaniment is active.
Shows the amount of pitch transposition in semitone steps.
Shows the amount the octave value is shifted.
Displays the selected style name, time signature, and tempo.
Shows the selected voice for the keyboard parts.
Displays the name of the selected Multi Pad Bank.
Displays the selected Registration Memory Bank name and number.
Shows the volume balance among the instrument's parts.
Displays information about the selected USB audio file.
Indicates the sequence order of Registration Memory numbers.
Displays the keyboard split point positions.
Indicates the input level when a microphone is connected.
Details on where data is stored: Preset, User, and USB drives.
Explanation of files that can be selected on the display.
Options for managing data files like copy, move, and delete.
Procedure to save original data (Songs, Voices) as a file.
Steps to create new folders for organizing original data.
How to rename files and folders on the instrument.
Procedures for copying and moving files and folders.
How to delete individual or multiple files and folders.
How to change character type and input characters for naming.
Other character entry operations like deleting and entering symbols.
How to restore the instrument's settings to factory defaults.
Procedures for backing up instrument data to USB flash memory.
How to select and play preset instrument sounds.
Instructions for layering two different instrument sounds.
Assigning different voices to the left and right hand keyboard sections.
Explanation of the Right 1, Right 2, and Left keyboard parts.
How to use the Left Hold function to sustain the left-hand voice.
Description of the properties and characteristics of different voices.
How to install and use expansion voice packs to expand sound options.
Procedure for removing installed expansion packs from the instrument.
Adjusting the overall pitch of the instrument in semitone steps.
Adjusting the instrument's master tuning frequency (e.g., 440 Hz).
Adjusting the pitch or scale for each individual note.
How to use the Pitch Bend and Modulation wheels for expressive control.
Overview of how to apply various effects to instrument voices.
Using Harmony/Echo effects to add vocal harmonies to melodies.
Steps to create custom Organ Flutes voices by adjusting flute footage.
References to advanced voice editing and parameter settings.
How to play along with backing styles using auto-accompaniment.
Information on styles featuring audio recordings of studio musicians.
A chart of common chords and explanation of fingering types.
Adjusting how the instrument detects chords for accompaniment.
Controls for starting, stopping, and managing style playback sections.
Using main variations, fill-ins, and break sections for dynamic playback.
How to change the tempo of style playback.
Creating smooth volume changes for starting and stopping styles.
Using the Repertoire function to load appropriate panel settings for styles.
Using OTS buttons to instantly load matching settings for a selected style.
Checking the information of One Touch Settings assigned to a style.
Recommending optimal styles based on the user's playing.
Controlling individual style channels and changing their assigned voices.
Adjusting the volume balance between style playback and keyboard sound.
Instructions on how to play back MIDI songs stored in the instrument.
Controls for song playback: Synchro Start, Pause, Rewind/Fast Forward.
Setting up the next song for seamless playback during live performance.
Viewing the musical score of a song on the instrument's display.
Viewing lyrics or text files associated with a song.
Controlling individual song channels to turn playback on or off.
Using guide functions to practice the right-hand part of a song.
Repeating an entire song or specific measures for practice.
Setting a specific range of measures for repeated playback.
Overview of methods for recording your keyboard performances.
Method for conveniently and quickly recording your entire performance.
Recording different parts of a performance to separate channels.
References to advanced song editing and playback features.
How to play audio files (WAVE, MP3) stored on a USB flash memory.
Controls for audio playback: play/pause, stop, prev/next, volume.
Repeating a specific section of an audio file.
Setting playback modes: single file, all files, or random.
Specific USB audio features available only on the PSR-S950 model.
How to record your performances as audio files to USB flash memory.
Detailed steps for recording your performance as an audio file.
How to trigger and play short pre-recorded rhythmic and melodic sequences.
Starting multi pad playback in sync with other instrument functions.
Matching multi pad pitch to chords played on the keyboard.
Instructions on using WAVE files for multi pad playback.
Linking WAVE files to create custom multi pads.
Loading panel settings (records) from the Yamaha website.
Browsing and selecting music finder records based on genre.
Searching music finder records by song name, keyword, style, or genre.
Adding custom song, audio, or style files to the Music Finder.
Saving current instrument settings to registration memory buttons.
Saving registered panel setups as a single bank file.
Loading previously saved panel setups by pressing memory buttons.
How to connect a microphone to the instrument's MIC/LINE IN jack.
Using vocal harmony effects to enhance singing with microphone input.
Explanation of different vocal harmony types and their modes.
Advanced settings for vocal harmony and the talk function.
How to access and use the mixing console for sound adjustments.
Adjusting volume, filter, tune, effect, and EQ parameters.
How to save mixing console configurations to registration memory.
Connecting audio input devices like microphones and guitars.
Connecting external audio systems and portable audio players.
Outputting video signal to a TV monitor for lyrics and chords.
Connecting external footswitches and foot controllers.
How to connect USB flash memory devices to the instrument.
How to format USB flash memory devices.
Connecting the instrument to a computer via USB TO HOST.
Connecting external MIDI devices using MIDI IN/OUT terminals.
Accessing and using the instrument's utility functions for global settings.
Common problems and their solutions related to power, noise, and basic functions.
Issues and solutions related to instrument voices.
Issues and solutions related to instrument styles.
Issues and solutions related to instrument songs.
Problems and solutions related to USB audio playback and recording.
Issues and solutions related to microphone and vocal harmony functions.
Problems related to foot pedals and the auxiliary input jack.
