Need help?Do you have a question about the Yamaha QL1 and is the answer not in the manual?
General| Channels quantity | 40 channels |
|---|---|
| Digital sound processing | - bit |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 135 W |
| Product color | Black |
| Rack mounting | Yes |
| Video capability | - |
| Total Harmonic Distortion (THD) | 0.05 % |
Weight and Dimensions| Depth | 562 mm |
|---|---|
| Width | 468 mm |
| Height | 272 mm |
| Weight | 14700 g |
PN16S Circuit Board (QL5) Diagram for PN16M Circuit Board.
FD2 (FDCOM) Circuit Board (QL5) Diagram for FD1M (FDCOM) Circuit Board.
Specifications and types of measuring instruments required for inspections.
Default parameter settings for inspections, including WORD CLOCK and +48 V MASTER.
Procedure for checking and updating the main program firmware.
Procedure for initializing the unit by pressing specific buttons during power-on.
Procedure for calibrating faders, referring to a specific section.
Inspection of analog input and output characteristics for QL5 and QL1.
Inspection of analog signal input and output for QL5 channels 17-32.
Inspection of analog signal input and output for PHONES L and R.
Inspection of digital input and output characteristics.
Inspection of digital output characteristics, including gain, f-characteristic, and distortion.
Procedure for checking fader movement, position, and vibration.
Procedure for checking power voltages for MY SLOT cards.
List of necessary equipment and materials for service checks.
List of essential items for performing service checks on the unit.
Network and PC configuration settings for service test applications.
Connection diagram and procedures for linking test equipment.
Check firmware version and other unit information.
Check CPU MRAM data bus and address bus.
Check CPU SDRAM data bus and address bus.
Check backup battery voltage.
Obtain and set the Real Time Clock.
Check PLLPU register by reading/writing.
Check DSP6 registers and SIO connection.
Check DSP7 registers and SIO connection.
Check CPU-SHARC communication and SDRAM.
Check SLOT1 signals and power voltage.
Check SLOT2 signals and power voltage.
Check WORD CLOCK PLL lock.
Check SYSTEM2/speaker connection and sound.
Check MIDI loopback transmission/reception.
Check GPI IN/OUT with jig.
Check PC communication.
Check DM9000 and Dante board link.
Check USB memory control line.
Check lamp lighting.
Check LCD indication.
Check touch point scale/luminance.
Check RECORDER IC register and SIO connection.
Check Brooklyn2 module and ports.
Check DNT board UART/SPI communication.
Check Ch Name LCD and channel names.
Check all LEDs lighting.
Check LEDs by color (red, orange, yellow, green).
Check input from switches.
Check input from encoders.
Check fader movement time.
Procedure for starting the CL unit for diagnostics.
Steps to launch the PC application for service testing.
Select the correct service test application in the tree window.
Ensure all test items are selected for comprehensive testing.
Methods to initiate the service test execution.
Shows how inspection results are displayed in the application.
Describes the function of each item in the application's menu bar.
Explains the command buttons and their functions in the tool bar.
Details the hierarchical display of test items in the tree window.
Displays a list of items included in the selected test step.
Shows a list of strings obtained through tests.
Displays communication contents with the main unit.
Lists commands assigned to F1 to F12 keys.
Describes the selected command and toggle-key state.
To Next Page
