Yamaha RM-CR - Page 46

RM-CR Reference Manual
45
[TOOLS]
[Update]
1 [DEVICE STATUS]
• Allows you to check the versions of the firmware and Dante of this unit. The firmware and Dante of this unit can be updated when
[Ready] appears below [Updatability].
• Allows you to check the versions of the firmware and Dante of peripheral devices. The firmware and Dante of the peripheral device
can be updated when [Connected] appears below [Updatability].
• If the firmware must be updated, the version number appears in red.
IMPORTANT: In order to update Dante, the network portion of this unit’s IP address and the network portion of Dante’s IP address
must be the same.
1