CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 109
Video
Analog to Analog Conversion Enables/disables the video conversion between the analog video jacks 117
Video Mode Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 117
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 119
Audio Output Selects a device to output audio. 119
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 120
Network
IP Address Configures the network parameters (such as IP address). 120
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 121
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 121
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 121
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. 122
Zone2 Set
Zone3 Set
Vol ume Enables/disables volume adjustments for Zone2 or Zone3 output. 122
Max Volume Sets the Zone2 or Zone3 maximum volume to prevent excessive loudness in the second zone. 122
Initial Volume Sets the Zone2 or Zone3 initial volume for when the unit is turned on. 122
Mono Switches between stereo and monaural for Zone2 or Zone3 output. 123
Zone Scene Rename Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV screen. 123
Zone Rename Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV screen. 123
Zone4 Set
Zone Scene Rename Changes the scene names (for Zone4) displayed on the front display or TV screen. 123
Zone Rename Changes the zone name (for Zone4) displayed on the front display or TV screen. 123
Monitor Out Assign Select the zone for which the MONITOR OUT/ZONE OUT jacks are used. 123
HDMI OUT2 Assign Select the zone for which the HDMI OUT 2 (ZONE OUT) jack is used. 124
Party Mode Set Enables/disables switching to the party mode for each zone. 124
Function
Input Assignment Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input source. 124
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 125
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 125
Wallpaper Selects the image to be used as wallpaper on the TV. 125
Trigger Output1
Trigger Output2
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 125
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 126
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 126
Memory Guard Prevents accidental changes to the settings. 126
Menu Item Function Page
To Next Page
Loading...
Need help?
General
