Yamaha RX-V371BL Quick Reference Guide

- 1 -
PUSH
Quick Reference Guide
for Europe
English
Preparing the remote control
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries into the battery case, following the polarity
markings.
3
Snap the battery compartment cover back into place.
■
Accessories
■
Items necessary for connection
The following accessories are supplied with this product.
Speakers
External components
Remote control
Front speaker
Ex.
Ex.
Batteries (2) (AAA, R03, UM-4)
Center speaker
AM loop antenna
Surround speaker
Indoor FM antenna VIDEO AUX input cover YPAO microphone
Active subwoofer
3
1
2
2
3
TV
Ex. Ex.
Cable
• Cables for connecting external components
(may differ depending on the devices you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
Playback device such as BD
(Blu-ray Disc)/DVD players
• Use speakers with an impedance of at least 6Ω.
• If you are using a CRT TV, we recommend that you use magnetically shielded speakers.
• Prepare at least two speakers (for front). The priority of the other speakers is as follows:
1 Two surround speakers
2 One center speaker

Yamaha RX-V371BL Specifications

General

Channels	5.1
Amplifier Type	Discrete
Power Output Impedance	6 ohms
Frequency Response	10 Hz - 100 kHz
Signal-to-Noise Ratio	100 dB
HDMI Inputs	4
HDMI Outputs	1
Audio Formats	Dolby TrueHD, DTS-HD Master Audio
Network Capability	No
USB Port	Yes
iPod/iPhone compatibility	Yes
Ethernet Port	No
Bluetooth	No
Wi-Fi	No
Dimensions (W x H x D)	435 x 151 x 315 mm
Input Sensitivity	200 mV
Power Output	100 W per channel (6 ohms, 1 kHz, 0.9% THD, 1 channel driven)