Yamaha RX-V500D Easy Setup Guide

Check that the following accessories are supplied with the product.
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (x5)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1)
(not required if your TV supports ARC [Audio Return Channel])
1 Preparation
Accessories
 Remote control  Batteries
(AAA, R03, UM-4) (x2)
Insert the batteries the right way round.
 DAB/FM antenna  YPAO microphone
 CD-ROM
(Owner’s Manual)
 Safety Brochure  Easy Setup Guide
Cables required for connections
Easy Setup Guide
English
AV Receiver
This document explains how to set up a 5.1-channel system and play back
surround sound from a BD/DVD on the unit.
To reduce the impact on natural resources, the Owner’s Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner’s Manual on the supplied CD-ROM.
PDF versions of this guide and “Owner’s Manual” can be downloaded from the
following website.
http://download.yamaha.com/
AB

Yamaha RX-V500D Specifications

General

Audio output channels	5.1 channels
Total Harmonic Distortion (THD)	0.9 %
Dynamic power per channel (4 Ohm)	130 W
Power output per channel (1KHz@6 Ohm)	135 W
Power output per channel (1KHz@8 Ohm)	115 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	5
Audio (L/R) in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Speakers connectivity type	-
Ethernet LAN	Yes
Supported radio bands	AM, DAB, DAB+, FM
Optical drive included	No
Display	LED
Product color	Metallic
Audio decoders	Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.1 W

Weight and Dimensions

Depth	315 mm
Width	435 mm
Height	161 mm
Weight	8100 g