Yamaha RX-V573 Quick Setup Guide

Check that the following accessories are supplied with the product.
The following cables (not supplied) are required to build the system described in this
document.
• Speaker cables (depending on the number of speakers)
• HDMI cable (x2)
• Audio pin cable (x1)
• Digital optical cable (x1)
(not required if your TV supports ARC [Audio Return Channel])
1 Preparation
Accessories
 Remote control  Batteries
(AAA, R03, UM-4) (x2)
Insert the batteries the right way round.
 AM antenna  FM antenna  YPAO microphone
 CD-ROM
(Owner’s Manual)
 Safety Brochure  Easy Setup Guide
• The illustrations of the main unit and remote control used in this guide are of the RX-V573 (U.S.A.
model), unless otherwise specified.
*The supplied FM antenna
varies depending on the
region of purchase.
Cables required for connections
Easy Setup Guide
English
AV Receiver
This document explains how to set up a 5.1- or 7.1-channel system (RX-V573
only) and play back surround sound from a BD/DVD on the unit.
To reduce the impact on natural resources, the Owner’s Manual for this product is
supplied on CD-ROM. For more information about this product, refer to the
Owner’s Manual on the supplied CD-ROM.
PDF versions of this guide and “Owner’s Manual” can be downloaded from the
following website.
http://download.yamaha.com/
[For U.S. customers only]
Visit the following website for additional information, FAQ’s, downloads such as
“Owner’s Manual” and product updates.
http://usa.yamaha.com/support/
UAB
RX-V473_573_esg_U.fm Page 1 Monday, January 23, 2012 2:40 PM
Black process 45.0° 240.0 LPI

Yamaha RX-V573 Specifications

General

Frequency range	10 - 100000 Hz
RMS rated power	805 W
Output impedance	1200 Ω
Speaker selector	B
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.07 %
Dynamic power per channel (3 Ohm)	160 W
Dynamic power per channel (4 Ohm)	130 W
Dynamic power per channel (8 Ohm)	110 W
Power output per channel (1KHz@6 Ohm)	95 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	4
Line-in	Yes
PC in (D-Sub)	No
Audio (L/R) in	3
Remote (IR) input	1
Composite video in	5
S-Video inputs quantity	0
Multichannel audio input type	RCA
Component video (YPbPr/YCbCr) in	2
Headphone connectivity	6.3 mm
Banana connector	14
Connectivity technology	Wired
Speakers connectivity type	Banana connector/Binding posts
AM band range	530 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Supported video modes	1080i, 1080p, 480p, 576i, 576p, 720p
Analog signal format system	NTSC, PAL
Display	VFD
Product color	Black
Audio decoders	Dolby TrueHD, DTS-HD, DTS-HD Master Audio
Volume control	Digital
Surround modes quantity	17
Apple docking compatibility	iPad, iPhone, iPod
Number of products included	1 pc(s)
Receiver dimensions (WxDxH)	435 x 315 x 161 mm
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	280 W
Antenna type	BNC, Term.
Audio system	7.1

Weight and Dimensions

Depth	315 mm
Width	435 mm
Height	161 mm
Weight	8200 g