Yamaha RX-V577 Firmware Updating Guide

1
Choose from the following 2 methods to update to the latest firmware.
Click here for
Firmware Update Through the Internet
(Connection to the Internet is required)
Click here for
Firmware Update by USB
(A USB thumb drive is required)
In case of error, see the
Troubleshooting
section
IMPORTANT NOTICE
Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the
Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by
Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to restore proper
operation will not be covered under the Yamaha Limited Warranty.
FIRMWARE UPDATING PROCEDURE

Yamaha RX-V577 Specifications

General

Receiver type	Surround
Audio output channels	7.2 channels
Dynamic power per channel (4 Ohm)	170 W
Dynamic power per channel (8 Ohm)	120 W
Power output per channel (1KHz@8 Ohm)	115 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	6
Composite video in	4
Digital audio optical in	1
Component video (YPbPr/YCbCr) in	2
Speakers connectivity type	-
Ethernet LAN	Yes
Supported radio bands	AM, FM
Optical drive included	No
Display	LED
Product color	Black
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio
Volume control	Rotary
Apple docking compatibility	Not supported
Power consumption (standby)	0.1 W

Weight and Dimensions

Depth	315 mm
Width	434.3 mm
Height	162.5 mm
Weight	8120 g