Need help?Do you have a question about the Yamaha RX-V777 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Audio output channels | 7.2 channels |
| Dynamic power per channel (4 Ohm) | 195 W |
| Dynamic power per channel (8 Ohm) | 130 W |
| Power output per channel (1KHz@8 Ohm) | 160 W |
| Power output per channel (20-20KHz@8 Ohm) | 92 W |
| HDMI in | 6 |
| Audio (L/R) in | 4 |
| Remote (IR) input | 1 |
| Composite video in | 5 |
| Component video (YPbPr/YCbCr) in | 2 |
| Speakers connectivity type | - |
| Ethernet LAN | Yes |
| Supported radio bands | AM, FM |
| Optical drive included | No |
| Product color | Silver |
| Audio decoders | Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio |
| Power consumption (standby) | 0.15 W |
Weight and Dimensions| Depth | 365 mm |
|---|---|
| Width | 435 mm |
| Height | 171 mm |
| Weight | 10500 g |
Answers to common questions regarding unit operation, features, and troubleshooting.
Guidance for resolving common issues with power, system, remote control, audio, and speakers.
Overview of the unit's capabilities, including content variety and sound features.
Identification and description of the unit's front, rear panels, and remote control.
Procedure for automatic speaker setup using the YPAO microphone.
List of error messages during YPAO measurement and their remedies.
Steps for connecting the unit to a wireless network or mobile device.
Instructions for downloading and installing firmware updates.
Adjustments for speaker impedance, remote control ID, and video signal.
To Next Page
