EasyManua.ls Logo

Yamaha RXA830 User Manual

Yamaha RXA830
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
English
Français
Deutsch
Svenska
Italiano
Español
Nederlands
G
Easy Setup Guide
Manuel de configuration rapide
Anleitung zur Schnelleinrichtung
Snabbinstallationsguide
Guida di configurazione rapida
Guía de configuración sencilla
Easy Setup-gids
AV Receiver
Ampli-tuner audio-vidéo
Question and Answer IconNeed help?

Do you have a question about the Yamaha RXA830 and is the answer not in the manual?

Yamaha RXA830 Specifications

General IconGeneral
Channels7.2
HDMI Outputs2
Audio D/A Converter192 kHz / 24-bit
DSP Presets17
HDMI SwitchingYes
3D TechnologyYes
EthernetYes
PhonoYes
Subwoofer Outputs2
Preout (Zone 2)Yes
Headphone OutputYes
Wi-FiYes
Frequency Response10Hz-100kHz
HDMI Inputs8
HDMI Pass-Through4K Ultra HD
Input Impedance47 kOhms
Input Sensitivity200 mV
Signal-To-Noise Ratio100 dB
Supported Audio FormatsFLAC, WAV
Video Features4K Ultra HD

Summary

1 Preparation

Accessories

Lists and describes the accessories supplied with the AV receiver.

Cables required for connections

Lists the necessary cables not supplied with the receiver for system setup.

2 Placing speakers

5.1-channel system

Diagram showing the placement of speakers for a 5.1-channel audio system.

7.1-channel system

Diagram illustrating speaker arrangement for a 7.1-channel audio setup.

3 Connecting speakers/subwoofer

Connecting speaker cables

Explains how to prepare and connect speaker cables to the unit and speakers.

Using a banana plug

Instructions on how to use banana plugs for speaker connections.

Connect the surround speakers

Details on connecting surround speakers to the unit's terminals.

Connect the subwoofer

Instructions for connecting the subwoofer to the SUBWOOFER PRE OUT jack.

For 7.1-channel system

Guide for connecting surround back speakers in a 7.1 system.

4 Connecting external devices

Connect external devices to the unit.

Step-by-step guide to connect BD/DVD players and TVs to the receiver.

Turn on the unit, the TV and the BD/DVD player.

Instructions for powering on connected devices in the correct sequence.

Use the TV remote control to change the TV input to video from the unit.

How to select the correct input on the TV to view the receiver's output.

5 Optimizing the speaker settings automatically (YPAO)

Connect the YPAO microphone to the YPAO MIC jack on the front panel.

Guide to connecting the YPAO microphone to the receiver's front panel.

Preparing for YPAO

Steps to prepare the subwoofer and room for the YPAO measurement process.

To start the measurement, use the cursor keys to select "Measure” and press ENTER.

Instructions on how to initiate the automatic speaker measurement using the remote.

Use the cursor keys to select "Save/Cancel" and press ENTER.

Steps to save or cancel the YPAO measurement results.

If "W-1:Out of Phase" appears

Procedure to troubleshoot and resolve the "Out of Phase" warning during YPAO.

Disconnect the YPAO microphone from the unit.

Final step to remove the microphone after speaker setting optimization.

6 Playing back a BD/DVD

If surround sound is not working

Troubleshooting tips for when surround sound playback issues occur.

Many more features!

Highlights additional features and directs users to the Owner's Manual for details.

Related product manuals