For your safety – pre-operation checks
7-2
7
Rear brake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
9-22, 9-24, 9-24
Throttle grip • Check for smooth rotation and automatic return. 9-27
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
9-19, 9-21
Brake levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
9-28
Centerstand, sidestand
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
9-28
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
6-39
Drive belt
• Check belt condition.
• Replace if damaged.
9-26
ITEM CHECKS PAGE
UBBVE0E0.book Page 2 Tuesday, February 8, 2022 7:29 AM
To Next Page