Yamaha TMAX XP560 - Windscreen (XP560)

Instrument and control functions
6-35
6
EAU96202
Windscreen (XP560)
The windscreen height can be
changed to one of two positions.
To change the windscreen height to
the high position
1. Remove the windscreen by re-
moving the bolts.
2. Remove the bracket by removing
the bolts.
3. Install the bracket to the high posi-
tion by installing the bolts, and
then tighten the bolts to the spec-
ified torque. WARNING! A loose
windscreen could cause an ac-
cident. Be sure to tighten the
screws to the specified torque.
[EWA21590]
TIP
Make sure the projection is inserted in
the hole.
1. Windscreen
1
1. Bolt
2. Washer
3. Windscreen
1. Bolt
2. Bracket
1
2
3
1
2
3
2
1
1
1. Bolt
2. Bracket
3. Projection / Hole
Tightening torque:
Bracket bolt:
7 N·m (0.7 kgf·m, 5.2 lb·ft)
2
13 13
UBBVE0E0.book Page 35 Tuesday, February 8, 2022 7:29 AM