Yamaha VF150 - Start-Up Checks; Low Oil Pressure-Alert

Instruments and indicators
43
EMU36111
Start-up checks
Place the remote control lever in neutral and
turn the main switch to “ ” (on). After all the
displays come on and the total hour display
comes on, the gauge will change to normal
operation. If the buzzer sounds and the water
separator-alert indicator blinks, consult your
Yamaha dealer immediately.
TIP:
To stop the buzzer, press the “ ” (set) or
“ ” (mode) button.
EMU36131
Low oil pressure-alert
If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatically
decrease to about 2000 r/min.
1. Set button
2. Mode button
1. Tachometer
2. Trim meter
3. Multifunction display
4. Cooling water pressure
5. Cooling water/engine temperature
6. Water detection-alert indicator
7. Battery voltage
8. Oil pressure (4-stroke models)
1. Set button
2. Mode button
2
1
ZMU05415
2
3
1
4
5
6
7
8
ZMU05416
SET MODE
1 2
ZMU08035
1. Tachometer
2. Water detection-alert indicator
3. Engine trouble alert/maintenance indicator
4. Trim meter
5. Multifunction display
6. Battery voltage
7. Cooling water/engine temperature
8. Oil pressure (4-stroke models)
9. Cooling water pressure
1
9 8 7 6
2 3 4
5
ZMU08034
U6EH32E0.book Page 43 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.