9-51
9
To charge the battery
Remove it from vehicle and confirm the rec-
ommended charging rate as specified on
the battery itself.
Select a suitable charger and follow the
manufacturer’s instructions, or have a
Yamaha dealer charge it for you.
Keep in mind that the battery tends to dis-
charge more quickly if the vehicle is
equipped with optional electrical accesso-
ries.
ECB00933
To charge a VRLA (valve-regulated lead-
acid) battery, a special battery charger is
required. Using a conventional battery
charger will damage the battery.
To store the battery
If the vehicle will not be used for more than
one month, remove the battery, fully charge
it, and then place it in a cool, dry place.
If the battery will be stored for more than
two months, check it at least once a month
and fully charge it if necessary.
ECB00942
Always keep the battery charged. Stor-
ing the battery in a discharged state for
an extended period of time will cause
permanent battery damage.
Do not store the battery in an excessive-
ly cold or warm place [below freezing or
above 30 °C (90 °F)].
To install the battery
Be sure the battery is fully charged.
1. Place the battery in its compartment.
2. Connect the positive battery lead first,
then the negative battery lead by install-
ing their bolt. NOTICE: When installing
UB4M11E0.book Page 51 Tuesday, August 4, 2020 1:04 PM
To Next Page
Loading...
Need help?
General
