9-56
9
4. Turn on the main switch, start the engine,
and turn on the electrical circuit in ques-
tion to check if the device operates. If the
fuse blows again immediately, have a
Yamaha dealer check the electrical sys-
tem.
5. Install the hood.
EBU39550
Headlights
This model is equipped with LED headlights.
There are no user replaceable bulbs. If one or
more headlights do not come on, check for a
loose connection, check the headlight fuse,
and then have a Yamaha dealer check the ve-
hicle.
When the headlights are set to low beam,
the outer two headlights come on.
When the headlights are set to high beam,
all four headlights come on.
EBU39611
Headlight beam adjustment
ECB00691
It is advisable to have a Yamaha dealer
make this adjustment.
To adjust the headlight beam
1. Remove the hood. (See page 9-10.)
2. Remove the headlight cover by removing
the quick fastener screws.
1. Quick fastener screw
UB4M11E0.book Page 56 Tuesday, August 4, 2020 1:04 PM
To Next Page
Loading...
Need help?
General
