5-8
5
Odometer and tripmeters
The odometer shows the total distance trav-
eled by the vehicle.
The tripmeters show the distance traveled
since they were last reset. The tripmeters can
be used to record the distance traveled on a
single trip, or to estimate the distance that
can be traveled with a full tank of gas, etc. The
service tripmeter shows the distance traveled
since it was reset at the last maintenance.
Push the “SELECT” button to switch between
the odometer “ODO”, the tripmeters “TRIP A”
and “TRIP B”, and the service tripmeter “ ”
in the following order:
ODO → TRIP A → TRIP B → → ODO
To reset a tripmeter, set the display to the
tripmeter you want to reset, then push the
“RESET” button until it is reset.
The odometer will lock at 199999.
The tripmeters will reset and continue
counting after 9999.9 is reached.
1. Odometer/Tripmeter A/Tripmeter B/Service
tripmeter/Error code display
2. “SELECT” button
3. “RESET” button
1
2 3
UB4M11E0.book Page 8 Tuesday, August 4, 2020 1:04 PM
To Next Page
Loading...
Need help?
General
