Name: Yamaha XL700 WaveRunner 2004
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

4-20

EJU01109

Adjusting the carburetor

The carburetor is a vital part of the engine

and requires very sophisticated adjustment.

Most adjusting should be left to a Yamaha

dealer who has the professional knowledge

and experience to perform it. However, the

operator may adjust the trolling speed as

part of the usual maintenance routine.

CAUTION:

The carburetor was set at the Yamaha

factory after many tests. If the settings

are disturbed by someone who does not

have the necessary technical knowledge,

poor engine performance and damage

may result.

EJU01303

Adjusting the trolling speed

1. Put the watercraft in the water.

2. Start the engine and warm it up for 1 or

2 minutes. Using a diagnostic tachome-

ter, adjust the engine speed to specifica-

tion.

3. Turn the throttle stop screw 1 clockwise

to increase engine speed if necessary.

Turn it counterclockwise to decrease

engine speed if necessary.

Trolling speed: 1,250–1,350 r/min

UF0M15.book Page 20 Tuesday, June 3, 2003 3:36 PM

Questions and Answers:

Need help?

Do you have a question about the Yamaha XL700 WaveRunner 2004 and is the answer not in the manual?

Yamaha XL700 WaveRunner 2004 Specifications

General