Name: Yamaha XL700 WaveRunner 2004
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

3-8

EJU10531

Bilge

Check for moisture and fuel residue in the

bilge.

Excessive water in the bilge can splash

into the carburetor and engine which could

cause engine damage.

To remove water from the bilge:

1. Remove the stern drain plugs.

2. Raise the bow of the watercraft until the

water drains.

3. After the water has drained, wipe the

bilge with dry rags to make sure that the

bilge is thoroughly dry.

4. Install the drain plugs.

EJU20581

Stern drain plug

Check the stern drain plugs for proper

installation.

CAUTION:

●

Make sure that the stern drain plugs

are tightened securely before launch-

ing the watercraft. Otherwise, water

may flood the engine compartment

and cause the watercraft to submerge.

●

Clean any foreign materials, such as

dirt or sand, from the drain plug

threads before installing the drain

plugs. Otherwise, the drain plugs may

be damaged and water may enter the

engine compartment.

UF0M15.book Page 8 Tuesday, June 3, 2003 3:36 PM

Questions and Answers:

Need help?

Do you have a question about the Yamaha XL700 WaveRunner 2004 and is the answer not in the manual?

Yamaha XL700 WaveRunner 2004 Specifications

General