Name: Yamaha XL700 WaveRunner 2004
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

4-15

TE:

●

Wipe off any water on the spark plug or

inside the cap before installing the spark

plug cap. Push the spark plug cap down

until it clicks.

●

If a torque wrench is not available when

you are fitting a new spark plug, a good

estimate of the correct torque is 1/4 turn

to 1/2 turn past finger tight. Have the

spark plug adjusted to the correct torque

with a torque wrench as soon as possible.

WARNING

Be careful not to damage the insulator

when removing or installing a spark plug.

A damaged insulator could allow sparks

to escape, which could lead to explosion

or fire.

EJU11391

Lubrication points

To keep moving parts sliding or rotating

smoothly, coat them with water-resistant

grease.

Recommended water-resistant grease:

Yamaha Marine Grease/

Yamaha Grease A

●

Throttle cable (carburetor end)

●

Choke cable (carburetor end)

UF0M15.book Page 15 Tuesday, June 3, 2003 3:36 PM

Questions and Answers:

Need help?

Do you have a question about the Yamaha XL700 WaveRunner 2004 and is the answer not in the manual?

Yamaha XL700 WaveRunner 2004 Specifications

General