Yamaha YPR-20 User Manual

2. Playing
A. Basic Operation
Step 1
When all the required connections have been made, turn
the POWER Switch ON. The POWER Indicator will light up.
Step 2
Select the sound you wish to play by pressing any of Voice
Select Buttons.
* Voice PIANO 1 will be automatically selected when the YPR-20 is
turned on.
Step 3
Adjust the volume with the VOLUME Control.
* The VOLUME Control also adjusts the headphones’ volume and the
output level of the AUX OUT Jacks.
Step 4
Play the keyboard. The YPR-20 can output up to 12 notes
at a time.
* When the supplied Foot Switch is connected, depress it with your foot
and you can sustain the played sound as you would with a Damper
Pedal when playing the piano.
B. Initial Touch Control
The YPR-20’s keyboard is responsive to touch. Playing
harder makes the sound louder and brighter and vice versa.
C. Demonstration Play
The YPR-20 has a demonstration song for each Voice (5
songs in total). To play this, do as follows:
Step 1
Press the DEMONSTRATION Button. The demonstration
song for each Voice will be played in order from PIANO 1
to VIBES in repetition.
Step 2
To stop the performance, press the DEMONSTRATION
Button again. ep,
Step 3
When you wish to play the songs individually, first press
any of the Voice Select Buttons and hold it down. Then
press the DEMONSTRATION Button. The corresponding
song will be played once. To stop it when being played,
press the DEMONSTRATION Button again.
* During demonstration play, the YPR-20 will not respond to your play.
* The demonstration play will not be output as MIDI performance
messages. Refer to the following pages for more information about
MIDI.
2. Playing

Yamaha YPR-20 Specifications

General

Brand	Yamaha
Model	YPR-20
Category	Musical Instrument
Language	English