OPERATION
1
2
3
4
5
6
7
8
9
10
11
6-1
JW3
STARTING
1. With the parking brake applied,
move the drive select switch to
“FWD” for forward, or “REV” for
reverse.
Do not shift from “FWD” forward
to “REV” reverse while the utility
vehicle is moving. Transmission
damage can result.
2. Turn the main switch to “ON.”
Do not depress the accelerator
pedal when turning on the main
switch or the vehicle may start
moving unexpectedly.
3. Check that your path is clear in
the direction you plan to go, and
slowly depress the accelerator
pedal. The vehicle will start to
move.
å Accelerator pedal
TIP
The parking brake automatically
releases when the accelerator pedal
is depressed.
To Next Page
Loading...
