Yamaha YTF2E - Storage Preparation; Vehicle and Battery Preparation for Storage

STORAGE
1
2
3
4
5
6
7
8
9
10
11
8-1
JW3
BATTERY
PREPARATION
1. Recharge the batteries and
check the fluid levels at least
once a month.
Do not allow cleaning solution
to enter battery cells. Serious
battery damage can result.
2. Clean the tops of the batteries
with a solution of baking soda
and water, as necessary, to
remove corrosion.
NOTICE
Perform the following preparations
when storing your utility vehicle for
extended periods of time.
TIP
Turn the main switch key to the OFF
position, remove the key and store
the key in a safe place.
CHASSIS
PREPARATION
1. Verify the tire pressure is set to:
Front: 68-82 kPa (10-12 psi)
Rear: 241-255 kPa (35-37 psi)
2. Clean exterior of the utility
vehicle and apply a rust inhibitor.
3. Cover the utility vehicle with a
breathable cover and store it in a
dry, well-ventilated area.
JW3-F8199-00.qxp_LIT_19626_16_05.qxd 2/16/15 4:05 PM Page 46