For your safety – pre-operation checks
5-2
5
Rear brake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
7-18, 7-19
Clutch
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
7-16
Throttle grip
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, adjust throttle grip free play.
7-13, 7-23
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
7-20, 7-22
Drive sprocket
• Check the drive sprocket nut torque.
• Tighten if necessary.
—
Wheels and tires
•Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Check for loose spokes and tighten if necessary.
7-14, 7-16
Shift pedal
• Make sure that operation is smooth.
• Check the shift pedal bolt torque.
• Correct if necessary.
7-18
Brake pedal
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
7-24
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
7-23
ITEM CHECKS PAGE
UB4B13E0.book Page 2 Wednesday, August 25, 2021 7:15 AM
To Next Page
Loading...
