Need help?Do you have a question about the Yamaha YZF-R15 2008 and is the answer not in the manual?
General| Engine Type | Liquid-cooled, 4-stroke, SOHC, 4-valve |
|---|---|
| Displacement | 149.8 cc |
| Bore x Stroke | 57.0 mm x 58.7 mm |
| Compression Ratio | 10.4:1 |
| Maximum Power | 17 PS @ 8, 500 rpm |
| Maximum Torque | 15 Nm @ 7, 500 rpm |
| Fuel System | Fuel Injection |
| Lubrication System | Wet sump |
| Clutch Type | Wet, multiple-disc |
| Front Suspension | Telescopic fork |
| Front Tire | 80/90-17 |
| Rear Tire | 100/80-17 |
| Fuel Tank Capacity | 12 liters |
| Frame Type | Delta box |
| Overall Length | 1, 995 mm |
| Overall Width | 670 mm |
| Overall Height | 1, 070 mm |
| Wheelbase | 1, 290 mm |
| Ground Clearance | 160 mm |
| Seat Height | 790 mm |
| Kerb Weight | 131 kg |
| Ignition System | TCI |
| Starting System | Electric |
| Rear Suspension | Linked type Monocross |
| Front Brake | Hydraulic single disc |
| Rear Brake | Drum brake |
Technical data for engine type, displacement, bore, stroke, and compression.
General and specific torque values for fasteners during assembly and repair.
Procedures for adjusting valve clearance, engine idling speed, and checking fluids.
Checks and adjustments for brakes, chain, steering head, wheels, and suspension.
Details on checking and replacing brake pads, calipers, and master cylinders.
Procedures for removing, disassembling, and checking rear brake components.
Steps for removing the engine, including disconnecting leads and fluids.
Procedures for removing, checking, and installing the cylinder head and related parts.
Procedures for removing, checking, and installing valves, springs, and seats.
Steps for removing, checking, and installing the cylinder, piston, and rings.
Procedures for removing, checking, and installing clutch components.
Procedures for separating, checking, and assembling the crankcase.
Steps for removing, checking, and installing the crankshaft and balancer.
Procedures for removing, disassembling, and checking transmission components.
Steps for removing, checking, and installing the throttle body and related sensors.
Circuit diagram and troubleshooting for the ignition system.
Circuit diagram and troubleshooting for the starter motor and related circuits.
Circuit diagram and troubleshooting for battery charging and related components.
Circuit diagram, self-diagnosis, and troubleshooting for the FI system.
Troubleshooting steps for engine starting issues, categorized by system.
To Next Page