Need help?Do you have a question about the Yamaha YZFR6V and is the answer not in the manual?
General| Displacement | 599cc |
|---|---|
| Compression Ratio | 13.1:1 |
| Final Drive | Chain |
| Bore x Stroke | 67.0mm x 42.5mm |
| Fuel System | Fuel Injection |
| Fuel Delivery | Fuel Injection |
| Ignition | TCI |
| Transmission | 6-speed |
| Rear Brake | Single hydraulic disc |
| Front Tire | 120/70ZR17 |
| Rear Tire | 180/55ZR17 |
| Wheelbase | 1380mm |
| Seat Height | 850mm |
| Fuel Capacity | 17.5 liters |
| Wet Weight | 190kg |
| Length | 2040mm |
| Width | 705mm |
| Height | 1100mm |
Details engine type, displacement, bore, stroke, fuel, oil, and filter specifications.
Outlines specifications for wheels, tires, brakes, suspension, and steering.
Lists voltage, ignition system, battery, lights, and component specifications.
Specifies torque values for various fasteners across engine and chassis components.
Contains charts detailing routine checks and adjustments based on mileage or time intervals.
Details removal, disassembly, checking, assembly, and balancing of the front wheel.
Covers removal, disassembly, checking, and installation of the rear wheel and sprocket.
Provides procedures for removing, checking, and assembling brake pads, calipers, and master cylinder.
Details removal, checking, and assembly of rear brake pads, caliper, and master cylinder.
Includes removal, disassembly, checking, assembly, and adjustment of front fork legs.
Covers procedures for removing the engine and its related components.
Details camshaft removal, checking, and installation, including timing chain procedures.
Provides steps for removing, checking, and installing the cylinder head and gasket.
Covers valve removal, checking, replacement, and spring specifications.
Provides procedures for removing, checking, and installing the clutch assembly and its components.
Covers crankcase separation, checking, assembly, and related component procedures.
Provides procedures for removing, checking, and installing connecting rods and pistons.
Details crankshaft removal, checking journal bearings, oil nozzles, and installation.
Covers transmission removal, disassembly, checking, and assembly of axles and gears.
Covers fuel tank and fuel pump removal, checking, and installation.
Covers circuit diagram, sidestand operation, and troubleshooting for the ignition system.
Includes circuit diagram, operation, and troubleshooting for the electric starting system.
Details circuit diagram, ECU self-diagnostics, fault codes, and troubleshooting.
Covers common issues preventing the engine from starting.
Troubleshooting steps for engine overheating issues.
To Next Page
