Yamato DF412/612 - Page 29

26
4. OPERATION PROCEDURE
Variable Fan Speed
4
Setting fan speed during operation
1) From
3
-1 above, press so that
“ ” appears with the “ ” flashing in
the lower display.
2) Press so that current speed setting (
～
) shows flashing in the upper display.
3) Using , and set speed and finalize
by pressing .
5
Setting fan speed at end of operation
1) From
3
-1 above, press so that
“ ” appears with the “ ” flashing in
the lower display.
2) Press so that current speed setting (
～
) shows flashing in the upper display.
3) Using , set speed and finalize by
pressing .
To return to the standby or operation screens press
twice.
6
Setting fan speed during programmed
operation
Fan speeds may be set for each program step
while building programs. See “Programming
Procedure” P.30.