Yamato DF412/612 - Calibration Offset Function

37
4. OPERATION PROCEDURE
Copying & Deleting Programs
2-1
 Deleting programs
Press repeatedly until shows,
flashing in lower display. Press .
2-2
shows with the “ ” flashing in lower
display. Select a pattern number to delete using
, or select (ALL) using ,
then press and hold .
2-3
When “ ” begins flashing in upper display,
confirm and finalize by pressing .
2-4
↓
Upper display shows “ ” (OK) with lower display
flashing the deleted program number (i.e.
), and initial delete screen is automatically
restored; indicating program has been deleted
successfully.