Yamato DF412/612 - Page 46

43
4. OPERATION PROCEDURE
CO
2
Emissions & Power Consumption Settings
4
：CO
2
emission factor.
The factory default setting of 550 (0.000550t
CO
2
/kWh) reflects the Environmental Ministry Press
Release on 6 November 6, 2013.
Applicable value varies by utility company. Contact the
servicing utility authority to confirm what value should
be used.
Press to change (constant) to
with last “ ” flashing.
Change the emission factor using .
Press to finalize.
Press to go return.
: Integrated CO
2
Emission
Press to change upper display from
(constant) to (flashing).
Press to reset CO
2
emission data.
Press to return.
Press and hold to go back to initial idle screen.