Yamato PB-200 User Manual (English)

Questions and Answers:

T
Tabitha CoxJul 28, 2025
Why does the displayed weight fluctuate excessively on my Yamato Scales?
- D
  David LambJul 28, 2025
  If the displayed weight on your Yamato Scales fluctuates excessively, there are several potential causes. First, check for any material between the platform and the scale body and remove it. Next, ensure that the weighing assembly is not in contact with any wires or the case; reposition them if necessary. Also, inspect the load cell connector for looseness or damage; reconnect or replace it if needed. Finally, a power board or CPU board malfunction could be the cause, requiring replacement of the respective board.
M
Matthew BlevinsAug 3, 2025
How to troubleshoot if my Yamato Scales will not power on?
- M
  Monica GarzaAug 3, 2025
  If your Yamato Scales won't power on, start by testing the batteries and reinstalling them if they are incorrectly installed or dead. Next, check the AC adapter to ensure it is properly seated and functioning; reseat it or replace it if necessary. If the issue persists, the CPU board may be malfunctioning and require replacement.
L
lvaldezAug 9, 2025
What to do if “Err” appears upon power up on my Yamato PB-200 Scales?
- A
  April RoblesAug 9, 2025
  If “Err” appears on your Yamato Scales upon power up, it indicates that the platform weight is too high. Clear the platform and restart the scale.
G
goodashleyAug 14, 2025
Why does the display of my Yamato Scales show four eights after being turned on?
- M
  michaelpayneAug 14, 2025
  If the display of your Yamato Scales continues to show four eights after being turned on, it is likely due to vibration or an unstable position or platform. Remove any sources of vibration or place the scale on a stable platform.
C
cody83Aug 21, 2025
What does it mean if “ErrL” appears upon power up on my Yamato PB-200?
- R
  Robert RuizAug 21, 2025
  If “ErrL” appears on your Yamato Scales upon power up, it means the platform weight is too low. Remove the platform, clear away any debris, and then reinstall the platform.