A
Alex BriggsAug 1, 2025
How to fix Yamato PPC-200W Scales when the batteries are running low?
- PpetersenderrickAug 1, 2025
If the batteries in your Yamato Scales are running low, replace all of them with new ones.
To Next PageTo Next PageHow to fix Yamato PPC-200W Scales when the batteries are running low?
If the batteries in your Yamato Scales are running low, replace all of them with new ones.
What to do if Yamato PPC-200W show initial error on startup?
If you're getting an initial error on startup with your Yamato Scales, try removing anything from the platform and press the key again. Alternatively, install the platform or remove any objects underneath it, then press the key again.
Why Yamato PPC-200W show weight out of range?
The weight out of range on Yamato Scales is usually displayed when the platform is removed or has something wedged under it.
What to do if Yamato Scales show electromagnetic disturbance error?
If your Yamato Scales show an electromagnetic disturbance error, which can be due to strong static electricity or electromagnetic disturbance, turn the power off and then on again.
How to fix weighing sensor error on Yamato PPC-200W Scales?
If your Yamato Scales display a weighing sensor error, turn the power off, and then turn it back on again.
What to do if Yamato PPC-200W Scales show electronic circuitry error?
If your Yamato Scales show an electronic circuitry error, turn the power off, and then turn it back on again.
How to install batteries or AC adaptor, ensuring proper sealing for washdown.
Instructions for ensuring the scale is level for accurate readings using the bubble level.
Procedures for powering the scale on and off, including auto-off functionality.
How to check the remaining battery life displayed on the scale.
Procedure to set the scale to zero, especially if a value is displayed when empty.
How to toggle between pound (LB) and kilogram (KG) units of measurement.
Steps to set the lower and upper limits for the over/under weighing indicator.
Covers Gross Weighing, Net Weighing, Batching, and using the Under/Over Indicator.
Steps to enter and navigate the user parameter mode for scale configuration.
Instructions for calibrating the analog meter, setting under and over indicator ranges.
Procedure to set the under and over setpoints for the analog meter registers.
General
