To Next PageTo Next PageWhat to do if my Yamato Scales will not turn on?
If your Yamato Scales won't turn on, first ensure that the batteries are installed with the correct polarity. If they are, try replacing all four batteries with fresh ones. Also, check that the adapter is properly connected to both the scale and a working power outlet.
How to fix low battery on Yamato PPC-300WP Scales?
If your Yamato Scales show a low battery warning, replace all four batteries with fresh ones.
What to do if Yamato PPC-300WP Scales show load over limit at start up?
If your Yamato Scales show a load over the allowable limit at start up, remove all items from the scale platform and press the key. If the issue persists, power the scale off and back on. If problems continue, calibrate the scale.
What to do if Yamato PPC-300WP show load under limit at start up?
If your Yamato Scales show a load under the allowable limit at start up, remove any items wedged under the scale platform and press the key. If the issue persists, power the scale off and back on. If problems continue, calibrate the scale.
What to do if I tried to zero a load greater than allowed on Yamato PPC-300WP?
If you attempted to zero a load greater than allowed on your Yamato Scales, remove all items from the scale platform and press the key. Power the scale off and back on. If problems continue, calibrate the scale.
What happens if I zeroed Yamato PPC-300WP with a load on the platform?
If you zeroed the Yamato Scales with a load on the platform and then removed the load, remove all items from the scale platform and press the key. Power the scale off and back on. Calibrate the scale.
What to do if Yamato PPC-300WP will not turn on?
If your Yamato Scales won't turn on, the batteries might be dead, or the AC/DC adapter may not be properly connected. Try replacing all four batteries with fresh ones. Also, check that the adapter is correctly connected to the scale and plugged into a working outlet.
What to do if Yamato PPC-300WP Scales shows load over allowable limit at start up?
If your Yamato Scales indicates a load exceeding the allowable limit upon startup, remove all items from the scale platform and then press the key.
What to do if Yamato PPC-300WP Scales shows low battery?
If your Yamato Scales indicates low batteries, replace all four batteries with fresh ones.
What to do if Yamato PPC-300WP shuts off due to exhausted batteries?
If your Yamato Scales shuts off because of exhausted batteries, replace all four batteries with fresh ones.
General| Capacity | 300 kg |
|---|---|
| Waterproof | Yes |
| Material | Stainless steel |
| Protection Rating | IP65 |
| Readability | 100g |
| Power | AC Adapter or Rechargeable Battery |
| Display | LCD |
