What to do if Yanmar 3YM20 Engine water in sail drive seal indicator lights are on?
If the water in sail drive seal indicator light is illuminated, it suggests the rubber sail drive seal is broken. In this case, it's recommended to consult an authorized Yanmar Marine dealer or distributor.
What to do if the Yanmar Engine oil low pressure alarm indicator lights?
If the Yanmar Engine oil low pressure alarm indicator lights up, this could be due to a low engine oil level. Inspect the engine oil level and add or replace oil if needed. Another potential cause is a clogged engine oil filter. In this case, replace the engine oil filter and the engine oil.
What to do if Yanmar 3YM20 starter turns but engine does not start?
If the Yanmar Engine starter turns but the engine doesn't start, possible causes include: lack of fuel, in which case you should add fuel and bleed the fuel system; a clogged fuel filter, requiring replacement of the filter element; or improper fuel, which means you should replace it with the recommended fuel.
What to do if indicators light on the instrument panel and alarm sounds during Yanmar 3YM20 operation?
If indicators light up on the instrument panel and an alarm sounds during Yanmar Engine operation, immediately reduce the engine speed and check which indicator has illuminated. Then, stop the engine and perform an inspection to determine the cause.
Why is the coolant high temperature alarm lighting up on my Yanmar Engine?
If the Yanmar Engine coolant high temperature alarm lights illuminate, it could be due to low coolant in the coolant tank or heat exchanger. Check the coolant level and refill as needed. Another possible cause is an insufficient seawater level, leading to a temperature rise. In this case, inspect the seawater system.
Why battery low charge indicator does not go out during Yanmar 3YM20 Engine operation?
If the Yanmar Engine battery low charge indicator remains on during operation, it could be caused by a loose or broken V-belt. Replace the V-belt or adjust its tension. Another possibility is a defective battery. Check the battery fluid level and specific gravity, and replace the battery if necessary.
What should I do if an alarm sounds during Yanmar 3YM20 operation?
If an alarm sounds during Yanmar Engine operation, immediately reduce the engine speed, check the warning lamps, and stop the engine to perform necessary repairs.
The primary manual for operating Yanmar marine engines.
Details of the EPA emission control system warranty for Yanmar engines.
Specifications, handling, and precautions for diesel fuel.
Specifications, handling, and checking procedures for engine oil.
Step-by-step guide on how to start the Yanmar engine safely.
Summary of maintenance items based on operating hours and time intervals.
Safety warnings before undertaking any troubleshooting procedures.
Checks to perform immediately after starting the engine to identify issues.
A guide linking engine symptoms to probable causes and measures.
Detailed specifications for 2YM15, 3YM20, 3YM30E, and 3YM30 engines.
Warranty details for the emission control system in the USA.
Warranty information for non-road emission systems.
General| Engine Model | 3YM20 |
|---|---|
| Number of Cylinders | 3 |
| Aspiration | Natural |
| Combustion System | Direct injection |
| Compression Ratio | 23:1 |
| Fuel System | Mechanical injection |
| Engine Type | Vertical, water-cooled 4-cycle diesel engine |
| Displacement | 0.854 L |
| Max Output | 21 hp (15.3 kW) / 3600 rpm |
| Cooling System | Fresh water cooling |
| Lubrication System | Forced lubricating by trochoid pump |
| Starting System | Electric starter |
| Alternator | 12V |
To Next Page
