Operation
48
Field harvesting
As a rule, crops should be harvested along the rows in
two directions according to the following steps.
1. Turn left by ridge for harvesting.
Harvest completely the areas manually handled.
If it is hard to harvest as the ridge is too high,
reserve 2-3 rows around, and then turn right for
harvesting.
2. Turn left for harvesting after reversing.
Bidirectional harvesting
(for long field)
3. Harvest in two directions if there is enough space on
both ends of the field.
Harvesting for small field
4. When working in small fields where distance “L” is
short, operate the combine by the procedure of the
illustration below.
5. Move slowly and turn right to harvest the 2-3 rows
reserved by the ridge.
[Precaution]
Do not reduce the engine speed when turning.
Otherwise, “poor screening” or “blocking” may be
caused.
Take care to prevent the reel from breaking in or
running into the ridge during harvesting by ridge.
Manual
harvesting
Forward
Reverse
https://tractormanualz.com/yanmar/
To Next Page
Loading...