Operation
47
2. Field preparation and harvesting
When harvesting, pay full attention to the
surroundings. Avoid the access of children.
Otherwise, they may be rolled in the moving
parts, or collision accident may occur when
turning.
● When moving backward, watch out
behind the combine harvester and drive
slowly.
● In case of abnormalities, turn off the
engine immediately, engage the brake
pedal lock, and put all work-related
control levers to “OFF” before checking.
● Make sure to turn off the engine, engage
the brake pedal lock, and put all
work-related control levers to “OFF”
before removing chaff and straw
blockage.
● When working with co-worker (s), use the
horn for mutual signaling. Otherwise,
accidental injury may occur.
● Never park the combine harvester in the
places piled up with chaff. Otherwise, fire
hazard may be caused.
● Do not harvest the crops with dew or
much moisture. Otherwise, the concave
screen may be damaged and can not
clean the grain.
Preparation of field
Check around the field and remove any miscellaneous
objects such as stone, steel plate, reed and wood pile
before operation. To ensure work efficiency, harvest the
four corners by hand as shown below.
Efficient working
Skilled operator can reap the four corners by driving
obliquely for 3 to 4 times to realize efficient working.
[Precaution]
Perform slant harvesting linearly. The length of
straws may be uneven and the threshing
performance be affected if the moving direction is
changed during harvesting.
Remove the cops lodged on the ridge or change the
lodging direction to make the ridge visible.
3m
3m
5m
3m
Manual
harvesting
Entrance
4m
4m
4m
3m
15m
Forward
Reverse
1
2
3
4
5
https://tractormanualz.com/yanmar/
To Next Page