CONTENTS
4
Periodic Inspection 71
1. Schedule for refueling, oiling and water supply 72
2. Checking and replacing oil of each part 73
3. Replacing HST filter and hydraulic oil 76
4. Checking and replacing cooling water 76
5. Replacing fuel filter 77
6. Cleaning the water separator 78
7. Draining the fuel tank 78
8. Bleeding fuel system 79
9. Cleaning and replacing the air filter 79
10. Cleaning the engine dust protector 79
11. Maintaining the battery 80
12. Checking the piping system 81
13. Checking the muffler 82
14. Checking the electrical wiring 82
15. Maintaining and adjusting the cutter blades 82
16. Adjusting the gap between feeding auger and base plate 83
17. Adjusting the gap between platform auger finger and base plate 83
18. Adjusting the position of reel 84
19. Checking and replacing fuse 84
20. Adjusting the chains 85
21. Adjusting the belts 86
22. Checking and adjusting the crawler 91
Trouble Shooting 94
1. Engine section 94
2. Harvesting and conveying section 95
3. Threshing section 96
Technical Specification 97
Main Wearing Parts 98
Accessories 99
Others 100
4
5
https://tractormanualz.com/yanmar/
To Next Page
Loading...