Yanmar YM155 - Page 30

78
79
Illustration
.-
-
, . -*<c*:.*: ;.. :-*
Caution/Remarks
1) Remove the bolt (8 x 16)
lock plate, washer, and
lock plate.
2) Drive the bolt into the
brake drum to remove
it.
NOT&-: For Step 2) use an
M8 bolr wit17 a thread length
over
1 in (25 mm).
For example, i7ydraulic
adapror cover firing
bolr /M8 x 451
11 Loosen oil plug (101 and
drain the oil.
2) Remove the 8 bolts (10 x 60).
and the (12 x 60) bolt. and the
two nuts
(121.
3) Use a plastic hammer to
loosen the flanged part and
bolt pans. Remove with rhe
rear axle shaft as the base.
Dlvision
Brake
Gear
case
ass'y,
final
reduc-
tion
Part Name
Brake
drum
Rear axle
housing
(L1 (R1
. .