A
TRANSPORT
(Continued
n
6.
When loading (or unloading) tractor onto
vehicle, use care as follows:
a) Use adequate loading ramp on loading dock.
b) Use lowest reverse gear when driving up
loading ramp.
c) Set parking brake and wheel blocks firmly
under vehicle wheels.
d) Do not try to drive onto trailer from ditch
bank.
7.
Secure the load with chain binders and be sure
they are tight. If chain binders are not available,
use rope, wire, blocks, or winch cable. Check
load after traveling
a
few kilometers and every
100km thereafter to make sure ties are not
coming loose. Also, check after rough road
bumps.
8.
A
safety chain will help control
a
drawn imple-
ment should
it
accidentally separate from
drawbar while transporting. Using appropriate
adapter parts, attach chain to tractor
drawbar
support or other specified anchor location.
Provide only enough slack in chain to permit
turning.
To Next Page
Loading...
