Yanmar YM240 - Fuel and Lubricants

Fuel and Lubricants 55
IMPORTANT
Some increase in oil consumption may be expected
when
SAE5W-20 or SAE 5W oils are used. Check
oil level more frequently.
If ambient temperature is below -12°C (10°F).
use an engine block heater.
List of engine lubricating oils
(8-3) TRANSMISSION-
(8 - 5) STORING
HYDRAULIC OILS LUBRICANTS
Use onlv John Deere Tvpe 303 or Hv-Grad Trans-
A
mission.and Hydraulic oil or its equivalent in the
CAUTION
transmission-hydraulic system.
Store fuel and lubricants out of reach of children.
(8-4) GREASE
Your tractor can operate at top efficiency only if
clean lubricants are used. Use clean containers to
Use
SAE multipurpose-type grease for all grease
handle all lubricants. Store them in an area pro-
fittings. Wheel bearing grease is recommended
tected from dust, moisture, and other
contamina-
for front wheel bearings.
tion.