Yanmar YM240 - Lubrication and Periodic Service; As Required and Daily;10-Hour Service

Lubrication and Maintenance 57
LUBRICATION AND PERIODIC SERVICE TIMETABLE
A
WARNING: Do not sewice tractor while engine is running.
AS REQUIRED
DAILY OR EVERY
10 HOURS
n
Item
No.
AR-I
AR-2
Capacity and
procedure
See page
61.
See page 60.
10-1
10-2
10-3
10-4
10-5
10-6
10-7
108
10-9
10-10
10-1 1
10-12
10-13
10-14
1
Description of
Lubricant
component
Brakes
Clutch
Description of service
Adjust pedal free travel.
Adjust pedal free travel.
Ciesel fuel
Engine oil
Transminion-Hydraulic
oil
Coolant
Bolts and nuts
Tirs
All grease fittings
Reflectors, horn and
headlights
Precleaner
Radiator
Filter screen
in the fuel
tank
(Fuel strainer)
Indimor lamps
Brakes
Clutch
See page 67.
See page
68.
See page 70.
See page
45.
See page 48.
Several strokes of
grease gun.
See page
65.
See page 72.
See page 73.
See page 78.
See page
61.
See page €0.
Check fuel level to supply for
cnedav operation.
Check oil level with dipstick fully
insened.
Check oil level.
Check coolant level at sub-tank.
Check tightness of front axle
bracket bolts and wheel bolts.
Check air pressure. inspect for
damage.
Lubricate grease fittings.
Make sure they are in good working
condition.
Clean precleaner.
Clean front grille and radiator
screen.
Clean screen before fill in the tank.
Check indicator lamps are in good
conditions.
Check pedal free travel. Adjust
it
if necessafy.
Check pedal free travel. Adjust it
if necessary.
I
JD303 or Hy-Grad
Transmission-
Hydraulic Oil
Use clean soft water
Multipurpose type
grease