EasyManua.ls Logo

Yanmar YM240 - Engine Starting and Warm-Up Procedures

Yanmar YM240
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating
the
engine
25
(3)
Coolant (capacity of radiator is 42 214.4
U.S.
quarts; capacity of sub-tank
is
0.75 W0.8
U.S.
quarts)
Check for adequate coolant in the sub-tank. If
low, add to the "FULL" level, and if
empty,
removing the pressurized type radiator filler cap,
add coolant to the rim of the filler opening, and
fill
it
to the "FULL" level in the sub-tank as well.
(4)
Air cleaner element
Inspect the air cleaner for contamination.
bowl
(5) Transmission-Hydraulic oil
Confirm
that the transmission oil
is
up to the
required level
by
using the dipstick.
If
insufficient.
replenish oil to the specified
level. When inserting
dipstick, rest
it
on the threads, but do not screw
it
(6)
Front axle oil (YM195DIYM240D)
Capacity of front axle oil
is
5
&?
(5.3 U.S. quarts)
for
YM195D. and
6
P
(6.3
U.S. quarts) for
YM240D. When inserting dipstick, rest
it
on the
threads, but do not screw
it
in.
Filling plug
with
dbniik
(7) Important
bob
and nuts
Check the engine and the hub boltdnuts of the
front and rear wheels to ascertain that they are
securely tightened. (See pae
62.)
(8) Tire inflation pressures
Check the front and rear tires pressures, making
sure they are properly inflated. If
the front wheels
are carrying an extra-heavy load consisting of the
front weights, and front loader. be sure to increase
the front wheel tire pressure.
(See
page 48.)
Air
cleaner
;fanem

Other manuals for Yanmar YM240

Related product manuals