46
Operating
the
tractor
(1)
Front
tread
1)
Adjusting front axle
(Adjustable front tread
is
factory option)
Front tread is adjustable in
88
mm
(3.5
in.)
steps.
A
CAuTloN
Do not
reverse
front
wheels
t.~
extend tread.
a) With jack under front weight support, jack
up tractor just enough to take weight off
tires.
Tractor
model
YM19S
.
YM195D
YM240
YM240D
b)
Remove bolts from tie rod clamps.
Tire
4.00--12
ISTD)
5-14
(STD)
4.00-15
(STD)
6-14
(STD)
Tread Range
.
,
24047
C)
Remove bolts from front axle.
Fixed axle
840mm
(33.1 in.)
860
mm
(53.9
in.)
840
mm
(33.1
in.)
922
rnm
(36.3 in.)
d) Slide axle knee to desired position.
Adjustable axle
1062to 1414mm
(42.0
to
56 in.)
-
1062 to 1414 mm
(42.0 to 56
in.)
-
e) Install axle bolts. Tighten to
20
kg-m
(147
ft-lbs) torque. Check and retighten
as instructed on page
45.
f) Install bolts in tie-rod, making sure tie
rod
is
changed same amount as axle.
g)
Adjust other side in same manner. Both
sides should be adjusted to same spacing.
To Next Page
Loading...
