Need help?Do you have a question about the Yaohua Weighing System XK3190-A12 and is the answer not in the manual?
General| Model | XK3190-A12 |
|---|---|
| Category | Weighing Indicator |
| Display Type | LED |
| Accuracy Class | III |
| Accuracy | 1/3000 |
| Storage Temperature | -25°C to +55°C |
| Humidity | ≤85% RH |
| Load Cell Excitation | DC 5V |
| Weighing Capacity | Depends on load cell configuration |
| Max Capacity | Depends on load cell configuration |
| Power Supply | AC 220V |
| Operating Temperature | 0°C to 40°C |
| Communication Interface | RS232 |
| Load Cell Connection | Up to 4 load cells of 350 ohm |
Details technical specifications, accuracy, and operating parameters of the weighing indicator.
Provides an overview of the XK3190-A12(E) weighing indicator and its applications.
Illustrates the front and back views of the indicator, showing its physical layout and components.
Explains the function of each key on the indicator, detailing their use in different modes.
Describes how to connect the indicator, including load cell and RS232 interfaces, and PCB connector definitions.
Guides on turning on the indicator, initial display, and automatic zero-setting functions.
Explains how to perform semi-automatic zero-setting and its conditions for validity.
Details the tare function, how to deduct weight, and switch between net and gross weight displays.
Describes the counting mode, sample quantity input, and initiation of the counting process.
Explains how to accumulate weights, display accumulated values, and clear memory.
Covers setting user-defined parameters like auto power off, baud rate, and filtering.
Provides details on RS232 communication, data format, and transmission.
Outlines the step-by-step procedure for calibrating the indicator, including division and full capacity settings.
Describes the quick calibration method for zero point and full capacity settings.
To Next Page
